![]() Eventually, you have to click on ‘Yes’ to continue. Note: If you decide to save the key to your computer, Windows will notify you to save the key on a network drive.Now save the recovery key on a suitable location like a network drive. Step-5: This step prompts you to save the recovery key.Step-4: BitLocker To Go asks you to generate a recovery key that can be used when you forget your password.Choose ‘Use a password to unlock the drive.’ Enter your preferred password and then retype the password. Step-3: In this step, BitLocker To Go asks you to select how you want to unlock your drive after it is encrypted.Note that this step does not delete any data already available on the drive.) Click on ‘Turn On BitLocker.’ (Consequently, BitLocker To Go will start the setup procedure of your USB drive. Step-2: Now, right-click the USB drive, and it will show a drop-down menu appears.If you are prompted with an AutoPlay dialogue window, then tap X to close. How to set up a USB drive with BitLocker To Go encryption? For added security, Enable the Secure Boot feature. The Legacy and Compatibility Support Module (CSM) options must be disabled. Devices with TPM 2.0 must have their BIOS mode configured as Native UEFI only. Note: TPM 2.0 is not supported in Legacy and CSM Modes of the BIOS. If this is not available, then you will have to update the BIOS before you implement BitLocker. Both these partitions should be formatted through the NTFS file system.Īnother requirement is to have BIOS compatible with TPM or the one that supports USB devices all through computer startup. In case your computer does not possess these two partitions, then BitLocker will make them. This allows for the initialization of the computer to start. The system partition will stay unencrypted, and the operating system partition will be encrypted. The operating system partition contains the Windows binaries. The system partition comprises the files required to start your PC, and its size should be a minimum of 100 MB. To turn on the BitLocker Drive Encryption on the drive, your PC’s hard disk should have a minimum of two partitions, i.e., a system partition and operating system partition. ![]() The particular device should also support the Modern Standby feature (earlier known as InstantGo). The most significant hardware feature needed to support BitLocker Device Encryption is a Trusted Platform Module chip (TPM). Hardware requirements for the drive that Windows 11 is installed on: You should possess access to a printer to print the recovery key.You should be logged in as an administrator.
0 Comments
Leave a Reply. |